Chemical Bonds

Your feedback on these self-help problems is appreciated. Click here to send an e-mail.

Shortcut to Questions

Q: 1 2 3 4 5 6 7 8 9 10 11

1

 A chlorine atom requires one electron to attain the electronic structure of argon (i.e. to become isoelectronic with argon)..

(1.) Chlorine atoms can form two types of bond. What are they?

(2.) Give examples of compounds exhibiting each of these types of bonds.

(3.) Give an example of a polar covalent bond involving chlorine.

2

Draw electron dot (Lewis) structures for the following entities. Show all valence shell electron pairs, whether bonded or not. For online tutorial help with this topic, see the chemcal module "Covalent Bonding"

(1.) HNO3 (arrangement of atoms HONO2)

(2.) H2SO4 (arrangement of atoms (HO)2SO2)

(3.) H3PO4 (arrangement of atoms (HO)3PO)

(4.) SO2 (arrangement of atoms SO2)

(5.) SO3 (arrangement of atoms SO3)

(6.) N2O4 (arrangement of atoms O2NNO2)

(7.) NCO- (arrangement of atoms NCO-

3

A compound is formed from two elements, one of which has a high electronegativity, and the other a low electronegativity. What properties would the substance be expected to exhibit?

(1.) Physical state (298 K, 101 kPa) - solid, liquid or gas?

(2.) Melting point - high or low?

(3.) Electrical conductivity in (a) the solid state, (b) the liquid state

(4.) Solubility in water - soluble or insoluble?

(5.) Solubility benzene - soluble or insoluble?

(6.) Hardness - hard or soft?

4

A compound is formed from two elements for which the electronegativity difference is very small. What properties would be expected of this substance?

(1.) Physical state (298 K, 101 kPa) - solid, liquid or gas?

(2.) Melting point - high or low?

(3.) Electrical conductivity in (a) the solid state, (b) the liquid state

(4.) Solubility in water - soluble or insoluble?

(5.) Solubility in benzene - soluble or insoluble?

(6.) Hardness - hard or soft?

5

Using the information in the table classify the solids A, B, C, D as metallic, ionic, network covalent or molecular covalent:

A
B
C
D

Melting point (° C)

1700

800

80

1540

Soluble in water

no

yes

no

no

Soluble in carbon tetrachloride

no

no

yes

no

Solid conducts electricity

no

no

no

yes

Fused state conducts electricity

no

yes

no

yes

Hardness

hard

hard

soft

hard

6

(1.) The hydrogen compounds of chlorine and sodium can be liquefied, the first by cooling, the second by heating. Explain the reasons for the difference in melting point of the two compounds.

(2.) Why do these liquids differ in electrical conductivity?

7

Write the appropriate word "polar", or "non-polar" for the following molecules. For online tutorial help with this topic, see the chemcal module "Electronegativity and Polar Molecules"

(1.) the carbon tetrachloride molecule (CCl4)

(2.) a carbon-chlorine bond in the carbon tetrachloride molecule

(3.) the 2,2-dichloropropane molecule (CH3CCl2CH3)

(4.) boron trifluoride (BF3)

(5.) phosphorus(V) chloride (PCl5)

(6.) dimethyl ether (CH3OCH3)

8

Indicate which of the following is a good conductor of electricity. Write an answer for both liquid and solid sates.

(1.) aluminium

(2.) calcium fluoride

(3.) carbon tetrachloride

(4.) mercury

(5.) phosphorus

(6.) sulfur dioxide

9

For each of the following molecules write the structural formula and give the hybrid state of each carbon atom:

(1.) ethane (CH3CH3)

(2.) ethene (ethylene, CH2CH2)

(3.) ethyne (acetylene, CHCH)

10

State the shape of each of the following entities (e.g. linear, angular, trigonal planar, trigonal pyramidal, tetrahedral). For online tutorial help with this topic, see the chemcal module "Molecular Shape and Structure" and "Applying VSEPR Theory"

(1.) H2O

(2.) Cl2

(3.) NH3

(4.) CH4

(5.) BF3

(6.) SO3

(7.) SO2

(8.) SO42-

(9.) H3O+

(10.) CO2

11

Classify the following molecules or ions according to their shape.

(1.) PF3

(2.) SnH4

(3.) BeF42-

(4.) NO2+

(5.) GeCl2

(6.) CO32-

(7.) N2O

(8.) NO2

(9.) NO2-

(10.) OF2

(11.) SCl2

(12.) HCO2-

(13.) NCS-

 
Answers  

1

 (1.) Chlorine forms ionic and covalent bonds.

(2.) An example of a compound in which chlorine forms ionic bonds is sodium chloride, NaCl(s). Sodium has a low electronegativity, whilst chlorine has a high electronegativity. Atoms of elements which have a large electronegativity difference tend to form predominantly ionic bonds.

An example of covalent chlorine bonding is the bond between two chlorine atoms in the Cl2 molecule. Here both atoms are identical, so there is no difference in electronegativity, and the bond is totally covalent in character.

(3.) An example of chlorine forming polar covalent bonds is the hydrogen chloride molecule, HCl. Here there is a small difference in electronegativity between the Cl and H atoms. This leads to an uneven electron distribution in the bond, and electrons will tend to spend more time near the more electonegative element (in the case of HCl, the chlorine atom). The polar covalent bond can be thought of as some way between a covalent bond (where bonding electrons spend equal time around both atoms in the bond), and an ionic bond (where bonding electrons spend 100% of the time around the more electronegative atom in the bond).

2
3

The large difference in electronegativity between the two elements is a strong indication that the compound formed will exhibit predominantly ionic bonding. This is the critical property which determines the following characteristics:

(1.) Physical state (298 K, 101 kPa). We would expect an ionic compound to be solid at 298K, 101 kPa.

(2.) Melting point. The melting point of most ionic compounds is high.

The high melting point of ionic compounds (and therefore their existence as solids at room temperature) is a direct consequence of the very large amount of energy required to break an ion away from the others in the crystal lattice.

(3.)(a) Electrical conductivity in the solid state. Solid ionic compounds are non-conductive, since the individual ions are not free to move in the solid lattice.

(b) Electrical conductivity in the molten (liquid) state. Molten ionic compounds are electrical conductors. When heated to become a liquid the solid ionic lattice breaks apart, allowing the ions to move around in the liquid state. In this state positive ions are able to move towards the negative electrode (and negative ions can move towards the positive electrode) where electrolysis occurs, hence providing a path for the conduction of an electric current.

(4.) Solubility in water. Some ionic compounds are water soluble, whilst others are not, so a general prediction cannot be made here.

(5.) Solubility in benzene. Ionic compounds are generally insoluble in non-polar solvents such as benzene.

(6.) Hardness. Ionic compounds are hard and brittle. The strong ionic bonds between the cations and the anions hold the ions in a very rigid lattice. The displacement of one portion of the lattice caused by a shock or blow results in like-charged ions being neighbours and repelling each other, hence breaking the lattice.

4  The small difference in electronegativity between the two elements implies that the bonding demonstrated by the compound is probably primarily covalent in character. The following will assume that the compound formed exhibits molecular covalent bonding (as opposed to network covalent bonding, which is relatively uncommon and results in vastly different properties):

(1.) Physical state (298 K, 101 kPa). Covalent compounds can be low melting solids, liquids, or gases at 298 K, 101 kPa.

(2.) Melting point. Melting is the process whereby the molecules obtain enough energy to overcome the attractive forces that hold them in the solid state, allowing them to move about independently in the liquid phase. Covalent compounds have low melting points (often below room temperature). Weaker van der Waals forces operate between component molecules instead of the strong electrostatic attractions beteen ions that are responsible for the high melting points of ionic compounds, so less energy is required to remove individual molecules from a solid lattice.

(3.)(a) Electrical conductivity in the solid state. Covalent compounds, like ionic compounds, are electrical insulators in the solid state. Only metals can normally behave as conductors in the solid state due to their mobile outer electrons on each atom which readily move from atom to atom under the influence of an electrical voltage.

(b) Electrical conductivity in the molten (liquid) state. Covalent compounds are electrical insulators in the liquid state. In the liquid state a covalent compound exists as a collection of individual, neutral molecules. Unlike the ions formed when an ionic compound melts, covalent molecules bear no charge, and cannot act as charge carriers. Ionic compounds when molten conduct electricity by the mechanism of electrolysis in which cations move to the negative electrode to receive electrons and anions move to the positive electrode to release electrons. The flow of electrons through the external electrical circuit constitutes an electrical current. Note that ionic compounds undergo a chemcial reaction at each electrode in this process, so ultimately conduction stops when all the ions have been reacted.

(4.) Solubility in water. Covalent compounds are unlikely to be soluble, unless they can react with the water (eg hydrogen chloride, a covalent molecule, reacts with water to form a pair of soluble ions: HCl(g) + H2O(l) → H3O+ + Cl-), or hydrogen bond with water (eg. alcohols such as ethanol, CH3CH2OH, which are covalent molecules containing highly polar O-H bonds capable of hydrogen bonding with water)

(5.) Solubility in benzene. Covalent compounds are generally soluble in non-polar solvents such as benzene.

(6.) Hardness. Solid covalent compounds are generally soft. The attractive intermolecular (van der Waals) forces between the molecules in the solid are far weaker than the electrostatic forces present between ions in an ionic lattice, and do not require much energy to be overcome, allowing the solid to crumble easily. In contrast, ionic compounds are hard because of the strong attractive forces between cations and anions. When an ionic comound does break, the planes of cations and anions move relative to each other so that like-charged ions become nearest neighbours, causing replusion and the crystal to split rather than crumble - hence ionic solids are hard but brittle.

5 A The compound has a very high melting point, which indicates that it is not a molecular covalent solid. Lack of solubility in water or carbon tetrachloride (CCl4, an organic, non-polar solvent) also tends to confirm that the solid is not a molecular covalent type. The solid does not conduct electricity, which rules out metallic bonding. The fused (molten) state is also electrically non-conductive, which rules out ionic bonding. This leaves us with network covalent bonding, which is also supported by the solid being described as hard and having a very high melting point.

B The compound has a moderately high melting point, which suggests ionic bonding or metallic bonding. Failure to conduct electricity in the solid state but being a conductor in the molten state indicates the solid is ionically bonded and this is confirmed by its solubility in water and lack of solubility in carbon tetrachloride.

C Failure to conduct electricity in either the solid state or the molten state rules out metallic or ionic bonding. The low melting point strongly suggests molecular covalent bonding, and solubility in carbon tetrachloride confirms this.

D The ability to conduct electricity in both the solid and fused states indicates the solid is metallic bonded.

6 (1.) The bonding in hydrogen chloride is covalent, due to the small difference in electronegativity between hydrogen and chlorine. Therefore hydrogen chloride has a low melting point since it is composed of discrete, covalently bonded H-Cl molecules which are held to each other in the solid phase by weak intermolecular forces only.

The bonding in sodium hydride is ionic due to the large difference in electronegativity between hydrogen and sodium. Therefore sodium hydride, NaH, has a high melting point due to the ionic bonding throughout the lattice.

(2.) As liquids, hydrogen chloride is a non-conductor whilst sodium hydride conducts electricity via electrolysis due to its consisting of free, mobile cations and anions which act as charge carriers. A voltage applied to the molten sodium hydride results in Na+ ions migrating towards the negative electrode, where Na(l) is then formed according to the equation

Na+ + e- → Na(l)

Note that at the temperature required to melt sodium hydride, any elemental sodium formed in the electrolysis will be in the liquid phase rather than the solid which is normal at room temperature.] . At the positive electrode gaseous hydrogen is formed according to

H- → ½H2(g) + e-.

From this pair of equations, the hydride and sodium ions are seen to act as charge carriers between the two electrodes. The result is a net movement of electrons from the positive electrode where they are released by the hydride ions, through the external circuit which includes the DC power source to the negative electrode, where they are taken up by the sodium ions. Note that in the solid state NaH(s) does not conduct current - there are ions present in the solid, but they are fixed in the ionic lattice and not free to travel and thereby conduct current.

The nonconductive nature of HCl(l) is due to the lack of charge carriers. There are two ways current can be conducted through a medium - via the movement of free electrons (as in metals) or via movement of free ions in electrolysis (as in molten ionic compounds). HCl(l) does not posess either of these two types of charge carriers - all the electrons are fixed in covalent H-Cl bonds, and there are no ions present, fixed or otherwise, so HCl(l) is a non-conductor.

7 (1.) The carbon tetrachloride molecule is non-polar. Even though the individual C-Cl bonds are polar (chlorine is more electronegative than carbon), the symmetry of the tetrahedral shape of the molecule means no overall molecular polarity exists, and the molecule is non-polar. [See the chemcal module, "Electronegativity and Polarity in Molecules" for some 3-dimensional illustrations of this concept.]

(2.) The individual carbon-chlorine bonds in carbon tetrachloride are polar since chlorine is more electronegative than carbon. This means that the bonding electron distribution in the bond is uneven, with bonding electrons spending more time near the chlorine atom, which takes on a partial negative charge, whilst the carbon atom takes on a partial positive charge.

(3.) The 2,2-dichloropropane molecule is polar since the individual carbon-chlorine bonds and carbon-hydrogen bonds are polar. Because the shape of the molecule is tetrahedral, the vector sum of these polar bonds does not cancel as in the case of carbon tetrachloride above, and results in an overall polarity in the molecule. Note that the 2,2-dichloropropane molecule is tetrahedral about the central atom, not planar. If the molecule were planar and the two polar C-Cl bonds arranged opposite to each other (and thus also the two C-H bonds), then the bond polarities would all cancel to provide a net molecular dipole of zero. However, since the molecule is tetrahedral, polarity of the two C-Cl bonds and the two C-H bonds do not cancel, and a net molecular dipole results. This contrasts with the case of carbon tetrachloride, where the molecule's tetrahedral shape cancelled the effect of the individual polar bonds and resulted in no molecular polarity.

(4.) Boron trifluoride is non-polar. Due to the triangular planar shape of the molecule with each B-F bond at 120 degrees to each other, the individual polar boron-fluorine bonds do not result in a net molecular polarity.

(5.) Phosphorus(V) chloride is non-polar. The individual phosphorus-chlorine bonds are polar, but the trigonal bipyramidal shape of the molecule results in no net molecular polarity.

(6.) Dimethyl ether is polar. At first glance the molecule may appear to be linear in shape, which would result in the effect of the two polar carbon-oxygen bonds cancelling out and no overall molecular polarity. However, there are two lone pairs present on the central oxygen atom which occupy two orbitals and give rise to a bent molecular shape. As a result the polarities of the two polar carbon-oxygen bonds partially reinforce to give a component in the same direction, leading to an overall molecular polarity.

8 (1.) Aluminium exhibits metallic bonding, and is therefore a good electrical conductor in both the solid and liquid state. Solid metals consist of a lattice of atoms surrounded by a "sea" of bonding electrons which are free to move under the influence of an applied electric voltage, hence allowing electrons to flow through the metal. Even in the molten state, the mobile outer electrons can move from atom to atom when a voltage is applied to the metal and thus metals conduct in both the molten and solid states.

(2.) Calcium fluoride exhibits primarily ionic bonding. Individual ions cannot act as charge carriers whilst trapped in the solid lattice (∴ CaF2(s) is a non-conductor of electricity). Heating the solid lattice to it's melting point frees the Ca2+ and F- ions, allowing them to carry charge through the liquid by electrolysis (∴ CaF2(l) is a conductor of electricity). Note the difference between the mode of conduction by ionic compounds as compared with metals.

(3.) Carbon tetrachloride exists as covalent molecules. In neither the solid nor liquid state are any free ions or electrons available to act as charge carriers, so it is a non-conductor of electricity in both states.

(4.) Mercury is metallic, and is therefore a good electrical conductor in both the liquid and solid states.

(5.) Phosphorus exists as either single P4 molecules (white phosphorus), or as long chains of P4 units (red phosphorus). In both cases the bonding is covalent, and phosphorus is an electrical non-conductor in both solid and liquid states.

(6.) Sulfur dioxide is a covalent molecule, and, like carbon tetrachloride, is an electrical non-conductor.

9
10  The shape of molecules is such that the repulsion between the atoms joined to a central atom is minimised (ie the constituent atoms will arrange to be as far away from one another as possible). Note that the effect of lone pairs is critical here, as they occupy an orbital which other atoms in the molecule will be repelled from as if they were another bonded atom. Since lone pairs are not bonded to a second atom, they occupy more space than a normal bonded pair. This means that lone pairs have a more repulsive effect on surrounding bonds than a bonded atom. The effect is responsible for deviations from "ideal" bond angles in molecules containing lone pairs (see below for examples of H2O and NH3)

(1.) The valence level of the central oxygen atom has two bonding pairs (to H atoms) plus two lone pairs. The replusions between any four charge clouds around a central atom is minimised if they adopt a tetrahedral arrangement. However the shape of a molecule is defined as the arrangement of the atoms around a central atom and the disposition of the lone pairs is not included, even though they have as much bearing on the molecular shape as the bonded pairs. Thus the molecule H2O has an angular (bent) shape arising from the two bonded pairs joining the O to the H atoms. The two lone pairs on the O atom occupy the remaining two tetrahedrally disposed valence level orbitals. (Without taking these lone pairs into account it may seem that a linear shape would keep all atoms furthest away from one another). The higher repulsive force exerted by the O lone pairs is observed in the H-O-H bond angle. The "ideal" bond angle in H2O is 109.5° , which is the angle between all four orbitals in a perfect tetrahedron. However, the measured H-O-H bond angle is reduced to 104.5° due to the higher repulsion exerted by the two O lone pairs both between themselves and also on the bonded pairs.

(2.) Cl2 is linear.

(3.) The NH3 molecule has a trigonal pyramidal shape. The valence level of the central N atom accomodates three N-H bonds as well as a lone pair. Four charge clouds repel each other to a tetrahedral disposition and one of those clouds is a lone pair. The three remaining bonded pairs would therefore have a trigonal pyramidal shape with the N atom at the apex of the pyramid. Again, the effect of the N lone pair is to reduce the ideal bond angle. The repulsive force exerted by the single N lone pair is less than that of the two O lone pairs in the water molecule example above, and the ideal tetrahedral H-N-H bond angle of 109.5° is only reduced to 107.3° .

(4.) The CH4 molecule has a tetrahedral shape. The central C atom has four electron pairs in its valence level and all are bonded pairs, so the H-C-H bond angles are all 109.5° .

(5.) The shape of the BF3 molecule is trigonal planar. The B atom has three electron pairs in its valence level. Three charge clouds repell each other so as to have an angle of 120° between them, and as there are no lone pairs in this molecule, its shape will be trigonal planar.

(6.) The SO3 molecule has a trigonal planar shape. The central S atom has three charge clouds in its valence level and all are bonded to O atoms. All OSO bond angles would be the ideal 120° .

(7.) The SO2 molecule has an angular shape. The valence level of the central S atom has three charge clouds which are disposed in a trigonal planar arrangement. One of these charge clouds is a lone pair and the remaining two are used by bonding electrons joining the S and O atoms. Thus the molecular shape is angular. The OSO bond angle would be reduced from the ideal angle of 120° due to the larger volume requirement of the lone pair.

(8.) The SO42- ion has a tetrahedral shape. The central S atom accomodates four bonds and no lone pairs.

(9.) The H3O+ ion has a trigonal pyramidal shape. The valence level of the central O atom has four charge clouds (therefore arranged tetrahedrally) made up of three bonding pairs in the O-H bonds and one lone pair. [This can be readily deduced by starting with a water molecule and adding an H+ ion using one of the O atom's lone pairs to form the bond]. The resultant shape of the ion obtained by disregarding one of the corners of a tetrahedron is a trigonal pyramid with the O atom at the apex.

(10.) The CO2 molecule has a linear shape. The valence level of the central carbon atom has four electrons but they are all incorporated into the two C=O bonds and there are no remaining electrons in the valence level as lone pairs. Consequently the molecule assumes a linear shape (compare with SO2 and H2O where the central atom bears one and two lone pairs, respectively).

11 (1.) The PF3 molecule has a trigonal pyramidal shape. The P atom has five valence level electrons and each F atom provides an additional electon to form three bonding pairs. The remaining two electrons from the P atom make up a lone pair, providing a total of four electron clouds around the P atom. Just like NH3 in the previous question [N and P are in the same Periodic Table Group and therefore have the same number of valence level electrons], the molecular shape resulting will be trigonal pyramidal with the P atom at the apex.

(2.) The SnH4 molecule has a tetrahedral shape. Tin is in the same Periodic Table Group as carbon and so has four valence level electrons. In SnH4, each of the H atoms provides an electron to join with one of the Sn electrons, forming a total of four bonding pairs. There are no remaining valence electrons on the Sn atom, so the electron arrangement and the molecular shape of the molecule are both tetrahedral.

(3.) The BeF42- ion has a tetrahedral shape. Beryllium is in the second Periodic Table Group and has two valence level electrons. Each of the F atoms provides a valence electron to form a single bond to the Be atom and the remaining two electrons required to make up the total of four bonding pairs come from the 2- charge the ion carries. There are no lone pairs on the Be atom so the electron arrangement around the Be atom and the shape of the ion are both tetrahedral.

(4.) The NO2+ ion has a linear shape. Nitrogen has five valence level electrons in its atom but in this ion one of the electrons has been lost, leaving a +1 charge on the ion. The remaining four valence level electrons from the N atom join with two valence level electrons from each of the O atoms to form double bonds between the N and O atoms. As there are no lone electrons left on the N atom, the electron arrangement around it as well as the shape of the ion are both linear.

(5.) The GeCl2 molecule has an angular or bent shape. Germanium is in the same Periodic Table Group as carbon and therefore also has four valence level electrons. In GeCl2 each Cl atom provides one valence level electron to join with one from the Ge atom to form a bonding pair. The remaining two valence electrons on the Ge atom constitute a lone pair, giving a trigonal planar arrangement of electron clouds around the Ge atom. As only the bonding pairs are included in the shape of the molecule, GeCl2 will be angular.

(6.) The CO32- ion has a trigonal planar shape. There are two ways of representing this ion: either by the Lewis diagram with with the C and O atoms joined by two single bonds plus one double bond or (more correctly) by the molecular orbital model where the ion is shown as containing three identical carbon/oxygen bonds which include a delocalised pi-electron cloud encompassing all four atoms. In either model, there are no lone electrons on the central C atom so the distribution of charge clouds around the C atom and the shape of the ion are both trigonal planar.

(7.) The shape of the N2O molecule is linear. The central N atom forms a triple bond with the other N atom and a double bond with the O atom. This arrangement leaves no lone pairs on the central N atom so the charge distribution and the molecular shape are both linear.

(8.) The NO2 molecule has an angular or bent shape. The central N atom has five valence electrons. As for carbonate ion ((6) above) the structure of this species can be represented by the Lewis structure or by the molecular orbital model which incorporates a delocalised pi-cloud of electrons encompassing all three atoms. In either version, the N atom has three charge clouds around it - two involved in bonding to the O atoms while a single electron resides in the third. This unusual situation with a single lone electron localised on the N atom still affects molecular shape in much the same way a lone pair does. Consequently the arrangement of the charge clouds around the N atom is trigonal planar but the shape of the molecule is angular.

(9.) The NO2- ion has an angular (bent) shape. Using the model for the NO2 molecule in part (8), the NO2- ion has just one more electron which joins with the single lone elctron on the N atom to form a lone pair. Consequently the shape of this ion, like the NO2 molecule, is angular.

(10.) The OF2 molecule has an angular shape. The O atom has six valence level electrons and each of the F atoms also provides a single electron to form two bonding pairs. This leaves four electrons on the O atom as two lone pairs. The four charge clouds (two bonding pairs + two lone pairs) will adopt a tetrahedral distribution in space but the shape of the molecule will be angular after the two lone pairs are disregarded. Due to the larger space requirements of lone pairs, the bonded pairs will be forced together to an angle less than the ideal 109.5° .

(11.) The SCl2 molecule has an angular shape. Note that as sulfur and oxygen are in the same Periodic Table Group, the reasoning for this part is the same as for the OF2 molecule in part (10). Thus the S atom with six valence level electrons gains a share of another two electrons from the two bonded Cl atoms resulting in two bonding pairs and two lone pairs on the S atom.

(12.) The HCO2- (formate) ion has a trigonal planar shape. This species can also be represented by two models: (a) the Lewis diagram showing the central C atom joined to one O atom by a double bond and to the second O atom and the H atom by single bonds or (b) the molecular orbital model with a delocalised pi-cloud extending over the C and both O atoms. Either model shows three charge clouds on the central C atom, all associated with bonding electrons, and no lone pairs on that C atom. Thus the charge distribution around the C atom is trigonal planar and the shape of the ion is also trigonal planar.

(13.) The shape of the NCS- is linear around the central C atom. The Lewis diagram for this ion shows the central C atom joined to the N atom by a double bond and to the S atom also by a double bond. This accounts for all the valence level electrons on the C atom so there are no lone pairs on it. The most stable arrangement of two charge clouds around a central atom is linear and this is also the shape of the ion.